Sintratec Kit – Sintering Detection Utility (using Gopro cameras)
I’ve written a great image detection program to make cool time lapses of my Sintratec Kit 3D...
Read Moreby Nicholas Pisca | Apr 22, 2020 | 3D Printing, C#, CNC, Fabrication, Scripting, Sintratec, SLS Printing, Translators | 2 |
I’ve written a great image detection program to make cool time lapses of my Sintratec Kit 3D...
Read Moreby Nicholas Pisca | Apr 11, 2020 | 3D Printing, CNC, Fabrication, Sintratec, SLS Printing | 0 |
Assembling a Sintratec Kit can take a few days and it’s a rather complicated process. Here...
Read Moreby Nicholas Pisca | Jun 6, 2019 | 3D Printing, CNC, Fabrication, Sintratec, SLS Printing | 2 |
What started as a fun little 3D Printing project for my daughter’s birthday party...
Read Moreby Nicholas Pisca | Jun 3, 2019 | 3D Printing, CNC, Fabrication, Sintratec, SLS Printing | 0 |
After completing our largest sintering job to date, we had a few things that needed attention. ...
Read Moreby Nicholas Pisca | Jun 1, 2019 | 3D Printing, CNC, Fabrication, Sintratec, SLS Printing | 0 |
This is really cool. We calibrated our kit to the point now were we can reliably get large...
Read Moreby Nicholas Pisca | May 26, 2019 | 3D Printing, C#, CNC, Fabrication, MEL, Sintratec, SLS Printing | 0 |
While pumping out model after model after model in the last few weeks, we’ve noticed some...
Read Moreby Nicholas Pisca | May 17, 2019 | 3D Printing, CNC, Digital, Fabrication, MEL, Representation, Sintratec, SLS Printing | 0 |
Over the last few weeks, I have been testing the limits of my Sintratec Kit. Some of my prints...
Read Moreby Nicholas Pisca | May 14, 2019 | 3D Printing, CNC, Digital, Fabrication, MEL, Sintratec, SLS Printing, Translators | 0 |
As we gain confidence in the power of this Sintratec Kit, we are attempting larger and larger...
Read Moreby Nicholas Pisca | May 13, 2019 | 3D Printing, CNC, Fabrication, Sintratec, SLS Printing | 1 |
Recently, I had a stepper coupler separate on my machine when I was lifting an 800-layer job, and...
Read Moreby Nicholas Pisca | May 9, 2019 | 3D Printing, CNC, Digital, Fabrication, MEL, Scripting, Sintratec, SLS Printing, Translators | 1 |
After a bunch of test prints, and a couple aborted prints (due to rough calibration or galvo...
Read Moreby Nicholas Pisca | May 9, 2019 | 3D Printing, CNC, Fabrication, Sintratec, SLS Printing | 1 |
If you have been following my videos and articles, you know a few days back, I had an odd...
Read Moreby Nicholas Pisca | May 8, 2019 | 3D Printing, CNC, Fabrication, Sintratec, SLS Printing | 0 |
I’m kind of jumping back and forth with my posts. This post is from a while back, but just...
Read More
Recent Comments