Functional 3D Printing | VW Door Handle Mounts
Transcript: In my recent Jetta restoration project during the coronavirus lockdown, I found...
Read More
Category: Digital
Functional 3D Printing | VW Top Trim Clips
Transcript: When I renovated my older Volkswagon TDI, I found several incorrect or broken trim...
Read More![Functional 3D Printing | Rain Barrel PVC Adapter [VIDEO]](https://www.nickpisca.com/sherpa/wp-content/uploads/2020/05/20200522_bungholesfw-627x376.jpg)
Functional 3D Printing | Rain Barrel PVC Adapter [VIDEO]
Another episode in Functional SLS 3D Printing: Making an adapter for a PVC downspout into a...
Read More
Sintratec Kit – Sintering Detection Utility (using Gopro cameras)
I’ve written a great image detection program to make cool time lapses of my Sintratec Kit 3D...
Read More
A Review of the Fear and Wonder (Futures of AI) Symposium
When I read that SCI-Arc was hosting a symposium on the topic of AI and design, naturally, I was...
Read More
Massive 3D Print Job – 1066 Layers on the Sintratec Kit, and How I Got There.
For the last few months, I’ve been trying to push the limit of this kit. For the most part,...
Read More
Understanding SLS Printing Issues and Using our Custom Temperature Calibration Grid for a Sintratec Printer
Over the last few weeks, I have been testing the limits of my Sintratec Kit. Some of my prints...
Read More
Large Sintratec Print Jobs, High Heat Temps, and Other Observations
As we gain confidence in the power of this Sintratec Kit, we are attempting larger and larger...
Read More
Excavating Sintratec SLS Prints
After a bunch of test prints, and a couple aborted prints (due to rough calibration or galvo...
Read More![[Video] Figuring out an STL Export/Import Workflow from Maya to Sintratec Central](https://www.nickpisca.com/sherpa/wp-content/uploads/2019/05/20190506_bypasstitle-627x376.jpg)
[Video] Figuring out an STL Export/Import Workflow from Maya to Sintratec Central
A brief recap on my recent progress with the Sintratec Kit. A few days ago, I tried to print a...
Read More
What happens if you don’t do the “Cool Down” in a Sintratec SLS 3D Printer
While testing another print on my Sintratec machine, I noticed some curling on the corner of my...
Read More
Video of Third Test Print with the Sintratec Kit, Showing Slight Deviation between Outlines and Hatching
After a few days of calibrating and testing, I finally decided to put a massive STL model on the...
Read More
Recent Comments