Author: Nicholas Pisca

Right Side Overflow Mod for a Sintratec Kit

Posted by Nicholas Pisca | May 13, 2019 | 3D Printing, CNC, Fabrication, Sintratec, SLS Printing |

Recently, I had a stepper coupler separate on my machine when I was lifting an 800-layer job, and...

Read More

Excavating Sintratec SLS Prints

Posted by Nicholas Pisca | May 9, 2019 | 3D Printing, CNC, Digital, Fabrication, MEL, Scripting, Sintratec, SLS Printing, Translators |

After a bunch of test prints, and a couple aborted prints (due to rough calibration or galvo...

Read More

Figured Out My Sintratec Hatch Issue: How to Fix the Galvos with a Custom Made Allen Wrench

Posted by Nicholas Pisca | May 9, 2019 | 3D Printing, CNC, Fabrication, Sintratec, SLS Printing |

If you have been following my videos and articles, you know a few days back, I had an odd...

Read More

Fine Calibration Process for the SIntratec Kit 3D Printer

Posted by Nicholas Pisca | May 8, 2019 | 3D Printing, CNC, Fabrication, Sintratec, SLS Printing |

I’m kind of jumping back and forth with my posts. This post is from a while back, but just...

Read More

[Video] Figuring out an STL Export/Import Workflow from Maya to Sintratec Central

Posted by Nicholas Pisca | May 6, 2019 | 3D Printing, CNC, Digital, Fabrication, MEL, Scripting, Sintratec, SLS Printing, Translators |

A brief recap on my recent progress with the Sintratec Kit. A few days ago, I tried to print a...

Read More

1
…
3
4
5
…
25