What happens if you don’t do the “Cool Down” in a Sintratec SLS 3D Printer
While testing another print on my Sintratec machine, I noticed some curling on the corner of my...
Read MorePosted by Nicholas Pisca | May 4, 2019 | 3D Printing, CNC, Digital, Fabrication, Sintratec, SLS Printing |
While testing another print on my Sintratec machine, I noticed some curling on the corner of my...
Read MorePosted by Nicholas Pisca | May 3, 2019 | 3D Printing, CNC, Digital, Fabrication, Sintratec, SLS Printing |
After a few days of calibrating and testing, I finally decided to put a massive STL model on the...
Read MorePosted by Nicholas Pisca | May 1, 2019 | 3D Printing, CNC, Fabrication, Sintratec, SLS Printing |
After assembling my Sintratec Kit, I found that I used a lot of my own tools to make the job a lot...
Read MorePosted by Nicholas Pisca | May 1, 2019 | 3D Printing, Digital, Fabrication, Scripting, Sintratec, SLS Printing
After working with various other home and economical 3D printers for years, I decide to splurge...
Read MorePosted by Nicholas Pisca | Mar 30, 2019 | Digital, Practice, Scripting |
After unsuccessfully attempting to install the long-unsupported AdSense Extension and the buggy...
Read More
Recent Comments