{"id":731,"date":"2018-06-16T18:41:04","date_gmt":"2018-06-17T01:41:04","guid":{"rendered":"http:\/\/www.nickpisca.com\/diesel\/?p=731"},"modified":"2018-06-17T20:14:01","modified_gmt":"2018-06-18T03:14:01","slug":"wicked-wheel-2-installation-on-a-hypermax-idi-van-turbo-kit-video","status":"publish","type":"post","link":"https:\/\/www.nickpisca.com\/diesel\/turbo\/wicked-wheel-2-installation-on-a-hypermax-idi-van-turbo-kit-video\/","title":{"rendered":"Wicked Wheel 2 Installation on a Hypermax IDI Van Turbo Kit [VIDEO]"},"content":{"rendered":"<p>Ever since I upgraded to R&amp;D&#8217;s 90cc IP, R&amp;D Injectors, and R&amp;D Stage 1 dual filter setup on the rail, I was getting too much fuel to the cylinders than my little Hypermax kit could provide air.\u00a0 I had some moderate EGT&#8217;s and mild boost numbers, and I figured getting a little more air in the intake might bump the boost up and bring the EGT&#8217;s down.\u00a0 I considered running an innercooler or upgrading my exhaust to 3.5- or 4-inch, but after perusing several forums, I elected to buy DieselSite&#8217;s &#8220;Wicked Wheel 2&#8221;\u00a0<a href=\"http:\/\/www.idiperformance.com\/store\/p78\/Wicked_Wheel_2_Compressor_wheel.html\" target=\"_blank\" rel=\"noopener noreferrer\">from R&amp;D&#8217;s inventory<\/a>.\u00a0 It seemed like the easiest bang for my buck, without a lot of custom tube routing or fabrication.<\/p>\n<div id=\"attachment_726\" style=\"width: 160px\" class=\"wp-caption alignright\"><a href=\"http:\/\/www.nickpisca.com\/diesel\/wp-content\/uploads\/2018\/06\/20180607_212642sfw.jpg\"><img loading=\"lazy\" decoding=\"async\" aria-describedby=\"caption-attachment-726\" class=\"wp-image-726 size-thumbnail\" src=\"http:\/\/www.nickpisca.com\/diesel\/wp-content\/uploads\/2018\/06\/20180607_212642sfw-150x150.jpg\" alt=\"If you break the seal on a Wicked Wheel, you won't stop pissing money for Diesel, cuz it'll be too much fun driving your IDI.\" width=\"150\" height=\"150\" srcset=\"https:\/\/www.nickpisca.com\/diesel\/wp-content\/uploads\/2018\/06\/20180607_212642sfw-150x150.jpg 150w, https:\/\/www.nickpisca.com\/diesel\/wp-content\/uploads\/2018\/06\/20180607_212642sfw-300x300.jpg 300w, https:\/\/www.nickpisca.com\/diesel\/wp-content\/uploads\/2018\/06\/20180607_212642sfw-125x125.jpg 125w\" sizes=\"(max-width: 150px) 100vw, 150px\" \/><\/a><p id=\"caption-attachment-726\" class=\"wp-caption-text\">If you break the seal on a Wicked Wheel, you won&#8217;t stop pissing money for Diesel, cuz it&#8217;ll be too much fun driving your IDI.<\/p><\/div>\n<p>The Wicked Wheel 2 (WW2) has some decent customer ratings.\u00a0 Some report moderate low-end boost improvement, and some report moderate\u00a0improvement all around.\u00a0Since my Hypermax tended to max out at 11psi (as per Hypermax engineering design), I was looking for any type of improvement.<\/p>\n<p>IDI guys\u00a0typically run these in the ATS or stock turbo setup in the truck, which is a more tried and tested platform than the rarer van kits, like the Van Banks or Van Hypermax.\u00a0 I was a bit worried when I bought this WW2 because all the information on DieselSite&#8217;s website said this was compatible with the ATS setup.\u00a0 However, R&amp;D must have tried this on a Hypermax Pulse system, because on his site, he wrote:<\/p>\n<ul>\n<li><em>-Wicked Wheel 2 billet compressor wheel from Dieselsite<\/em><\/li>\n<li><em>-58mm inducer, 75mm exducer<\/em><\/li>\n<li><em>-Drop in wheel for the Factory 93\/94 Turbo, ATS 093, ATS 088,\u00a0<\/em><strong>and Hypermax Pulse Turbo<\/strong><\/li>\n<li><em>&#8211; R&amp;D proven 10whp and 35wtq gain over the factory turbo with an RD2-90 injection pump and Stage 1 injectors in back to back dyno testing.<\/em><\/li>\n<li><em>-Faster Spool and lower EGT&#8217;s<\/em><\/li>\n<\/ul>\n<p>He must have slid a WW2 on the hypermax pulse turbo shaft and mated it with the turbo housing, to confirm it would reside without any clash.\u00a0 Thankfully, his research was spot on, and I confirmed it myself (as shown in the video below) that a WW2 works on the Hypermax Pulse system.<\/p>\n<p>Here is the video of my install procedure:<\/p>\n<p><iframe loading=\"lazy\" width=\"640\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/Jem7gHWDqvc?feature=oembed\" frameborder=\"0\" allow=\"autoplay; encrypted-media\" allowfullscreen><\/iframe><\/p>\n<p>DieselSite and R&amp;D have some lofty claims about the capabilities of these WW2 turbines. I tend to keep such audacious claims at arms length, because almost all enhancement upgrade claims from manufacturers are too good to be true.\u00a0 But I figured what could it hurt: if it doesn&#8217;t improve anything, then I&#8217;ll just be out $200; If it helps, then it&#8217;ll be worth the money; If it makes things worse, then I&#8217;ll just downgrade to the old Hypermax turbine.\u00a0 Seemed like I didn&#8217;t have much to lose other than money and some time.<\/p>\n<p>While I&#8217;m on the topic of installation time, replacing a turbine on a van turbo was only an hour job.\u00a0 VERY EASY.\u00a0\u00a0<a href=\"http:\/\/www.nickpisca.com\/diesel\/turbo\/differences-between-the-idi-van-and-idi-truck-engines\/\" target=\"_blank\" rel=\"noopener noreferrer\">The van has only a few repair advantages over the IDI truck<\/a>, so\u00a0I&#8217;ll take what I can get.\u00a0\u00a0<a href=\"http:\/\/www.dieselsite.com\/pdffiles\/ww.pdf\" target=\"_blank\" rel=\"noopener noreferrer\">DieselSite&#8217;s instructions (which by the way, are pretty lackluster)<\/a>\u00a0request the mechanic remove the whole turbo from the truck bay, which might be prudent for someone who will have to lay over their engine to access the turbine shaft, and conduct the WW2 replacement on a workbench.\u00a0 But since my van doghouse allows for substantial access to the turbo kit and rear of the engine, I didn&#8217;t see the harm in doing the turbine swap on the pedestal.<\/p>\n<div id=\"attachment_723\" style=\"width: 810px\" class=\"wp-caption alignnone\"><a href=\"http:\/\/www.nickpisca.com\/diesel\/wp-content\/uploads\/2018\/06\/20180611_112456sfw.jpg\"><img loading=\"lazy\" decoding=\"async\" aria-describedby=\"caption-attachment-723\" class=\"wp-image-723 size-full\" src=\"http:\/\/www.nickpisca.com\/diesel\/wp-content\/uploads\/2018\/06\/20180611_112456sfw.jpg\" alt=\"Hypermax Turbo without the turbine (see video above)\" width=\"800\" height=\"537\" srcset=\"https:\/\/www.nickpisca.com\/diesel\/wp-content\/uploads\/2018\/06\/20180611_112456sfw.jpg 800w, https:\/\/www.nickpisca.com\/diesel\/wp-content\/uploads\/2018\/06\/20180611_112456sfw-300x201.jpg 300w, https:\/\/www.nickpisca.com\/diesel\/wp-content\/uploads\/2018\/06\/20180611_112456sfw-768x516.jpg 768w\" sizes=\"(max-width: 800px) 100vw, 800px\" \/><\/a><p id=\"caption-attachment-723\" class=\"wp-caption-text\">Hypermax Turbo without the turbine (see video above)<\/p><\/div>\n<div id=\"attachment_724\" style=\"width: 810px\" class=\"wp-caption alignnone\"><a href=\"http:\/\/www.nickpisca.com\/diesel\/wp-content\/uploads\/2018\/06\/20180611_112500sfw.jpg\"><img loading=\"lazy\" decoding=\"async\" aria-describedby=\"caption-attachment-724\" class=\"wp-image-724 size-full\" src=\"http:\/\/www.nickpisca.com\/diesel\/wp-content\/uploads\/2018\/06\/20180611_112500sfw.jpg\" alt=\"Separate the down-pipe so you can hold the back side of the shaft when removing and installing the turbines.\" width=\"800\" height=\"389\" srcset=\"https:\/\/www.nickpisca.com\/diesel\/wp-content\/uploads\/2018\/06\/20180611_112500sfw.jpg 800w, https:\/\/www.nickpisca.com\/diesel\/wp-content\/uploads\/2018\/06\/20180611_112500sfw-300x146.jpg 300w, https:\/\/www.nickpisca.com\/diesel\/wp-content\/uploads\/2018\/06\/20180611_112500sfw-768x373.jpg 768w\" sizes=\"(max-width: 800px) 100vw, 800px\" \/><\/a><p id=\"caption-attachment-724\" class=\"wp-caption-text\">Separate the down-pipe so you can hold the back side of the shaft when removing and installing the turbines.<\/p><\/div>\n<div id=\"attachment_727\" style=\"width: 810px\" class=\"wp-caption alignnone\"><a href=\"http:\/\/www.nickpisca.com\/diesel\/wp-content\/uploads\/2018\/06\/20180611_113501sfw.jpg\"><img loading=\"lazy\" decoding=\"async\" aria-describedby=\"caption-attachment-727\" class=\"wp-image-727 size-full\" src=\"http:\/\/www.nickpisca.com\/diesel\/wp-content\/uploads\/2018\/06\/20180611_113501sfw.jpg\" alt=\"Ready for housing reassembly and auxiliary parts reinstallation.\" width=\"800\" height=\"398\" srcset=\"https:\/\/www.nickpisca.com\/diesel\/wp-content\/uploads\/2018\/06\/20180611_113501sfw.jpg 800w, https:\/\/www.nickpisca.com\/diesel\/wp-content\/uploads\/2018\/06\/20180611_113501sfw-300x149.jpg 300w, https:\/\/www.nickpisca.com\/diesel\/wp-content\/uploads\/2018\/06\/20180611_113501sfw-768x382.jpg 768w\" sizes=\"(max-width: 800px) 100vw, 800px\" \/><\/a><p id=\"caption-attachment-727\" class=\"wp-caption-text\">Ready for housing reassembly and auxiliary parts reinstallation.<\/p><\/div>\n<p>Back to the topic, I took the manufacturer claims with a grain of salt.\u00a0 I figured whatever improvement I&#8217;d get from a simple turbine replacement, it would be pretty minor.<\/p>\n<p>I was completely wrong.\u00a0 The Wicked Wheel 2 completely transformed my Hypermax setup.<\/p>\n<div id=\"attachment_728\" style=\"width: 810px\" class=\"wp-caption alignnone\"><a href=\"http:\/\/www.nickpisca.com\/diesel\/wp-content\/uploads\/2018\/06\/20180611_112910sfw2.jpg\"><img loading=\"lazy\" decoding=\"async\" aria-describedby=\"caption-attachment-728\" class=\"wp-image-728 size-full\" src=\"http:\/\/www.nickpisca.com\/diesel\/wp-content\/uploads\/2018\/06\/20180611_112910sfw2.jpg\" alt=\"Standard Hypermax Turbine (left) and Wicked Wheel 2 (right)\" width=\"800\" height=\"474\" srcset=\"https:\/\/www.nickpisca.com\/diesel\/wp-content\/uploads\/2018\/06\/20180611_112910sfw2.jpg 800w, https:\/\/www.nickpisca.com\/diesel\/wp-content\/uploads\/2018\/06\/20180611_112910sfw2-300x178.jpg 300w, https:\/\/www.nickpisca.com\/diesel\/wp-content\/uploads\/2018\/06\/20180611_112910sfw2-768x455.jpg 768w\" sizes=\"(max-width: 800px) 100vw, 800px\" \/><\/a><p id=\"caption-attachment-728\" class=\"wp-caption-text\">Standard Hypermax Turbine (left) and Wicked Wheel 2 (right)<\/p><\/div>\n<div id=\"attachment_729\" style=\"width: 810px\" class=\"wp-caption alignnone\"><a href=\"http:\/\/www.nickpisca.com\/diesel\/wp-content\/uploads\/2018\/06\/20180611_112850sfw.jpg\"><img loading=\"lazy\" decoding=\"async\" aria-describedby=\"caption-attachment-729\" class=\"wp-image-729 size-full\" src=\"http:\/\/www.nickpisca.com\/diesel\/wp-content\/uploads\/2018\/06\/20180611_112850sfw.jpg\" alt=\"Standard Hypermax Turbine (left) and Wicked Wheel 2 (right)\" width=\"800\" height=\"351\" srcset=\"https:\/\/www.nickpisca.com\/diesel\/wp-content\/uploads\/2018\/06\/20180611_112850sfw.jpg 800w, https:\/\/www.nickpisca.com\/diesel\/wp-content\/uploads\/2018\/06\/20180611_112850sfw-300x132.jpg 300w, https:\/\/www.nickpisca.com\/diesel\/wp-content\/uploads\/2018\/06\/20180611_112850sfw-768x337.jpg 768w\" sizes=\"(max-width: 800px) 100vw, 800px\" \/><\/a><p id=\"caption-attachment-729\" class=\"wp-caption-text\">Standard Hypermax Turbine (left) and Wicked Wheel 2 (right). The WW2 is substantially wider, taller, and dips into the turbo housing much further, allowing it to suck more air into the intake hat.<\/p><\/div>\n<p><em>Before the WW2 upgrade,<\/em>\u00a0the Hypermax kit was designed to max out at 11psi hauling the heaviest load up a major grade.\u00a0 Day to day driving\u00a0 would typically max out around 4-6psi on flat straightaways and city driving.\u00a0 I often never reached the mythical 11psi maximum that Hypermax states in their documentation.\u00a0 Also, with my R&amp;D injector and IP upgrades, I was already reaching 1100 deg F EGT&#8217;s with moderate inclines, forcing me to lay off the accelerator in extreme cases.<\/p>\n<p><em>After the WW2 upgrade<\/em>\u00a0(without any major tweaking of the tuning and timing yet), I was able to achieve\u00a0<strong>10.0 psi<\/strong>\u00a0boost on my first test drive on a flat highway with an empty van.\u00a0 With some timing adjustments (set to 6.0 deg BTDC at the moment), I was able to achieve\u00a0<strong>11.0<\/strong>\u00a0and\u00a0<strong>12.8 psi<\/strong>\u00a0boost on a flat highway with an empty van at WOT.\u00a0 Also, the EGT&#8217;s are\u00a0<strong>150-200 deg F lesser<\/strong>\u00a0than before, keeping the EGT&#8217;s under 1000 deg F for the duration of my initial WOT test runs.\u00a0 I haven&#8217;t even tried taking the van up any hills yet to see if the boost surpasses 12.8 psi.\u00a0 That is very impressive, because it appears to have exceeded the design capabilities of the Hypermax kit with a simple part replacement.<\/p>\n<p>Also, the city driving has substantially improved as well.\u00a0 It spools up much faster, and it basically drives like a car now.\u00a0 It would probably beat my Jetta TDI off the line now.\u00a0 I&#8217;d estimate the earlier spooling to something about double the boost than it was before.\u00a0 It&#8217;s hard to quantify Los Angeles city driving in any sort of regimented way, but the snappy performance speaks for itself.<\/p>\n<p>Overall, I&#8217;m very impressed with the WW2. For a mild amount of money (just over $200) and an hours-worth of wrenching time, I was able to get more boost than I ever attained with the standard Hypermax setup.\u00a0 Also, it provided lower EGT&#8217;s, which will help in the longevity of\u00a0<a href=\"http:\/\/www.nickpisca.com\/diesel\/engine\/7-3-idi-engine-rebuild-process\/\" target=\"_blank\" rel=\"noopener noreferrer\">my newly-rebuilt IDI engine<\/a>.\u00a0 Even though I haven&#8217;t tested the beast up some of my nearby California inclines, I&#8217;m considering bringing my IP down a flat on the fuel screw.\u00a0 While it&#8217;s sexy to have that extra boost, I&#8217;m not in the business of making my IDI van a hot rod.\u00a0 Instead, I&#8217;d like to keep the EGT&#8217;s at a minimum while getting above-moderate boost while preserving fuel economy.\u00a0 I think turning it down a flat will afford me those results.\u00a0 I&#8217;ll post more as I play with the timing more and drive it around.\u00a0 But in the meantime, I&#8217;m going to slurp us Diesel like it&#8217;s 1999, cuz this beast is so much fun to drive around in.<\/p>\n<p>&nbsp;<\/p>\n<p><strong>Update 6\/17\/18:<\/strong><\/p>\n<p>I turned the IP down a whole flat and kept the timing at 6 deg BTDC.\u00a0 I drove it around the city\u00a0 to test if the lesser fuel supply would impact the turbo spooling.\u00a0 I wasn&#8217;t able to take it on the highway due to the traffic.<\/p>\n<p>Just beating it around town, I was able to obtain 8.6 psi and 9.8 psi with around 3\/4 throttle.\u00a0 I would have liked to have tested it on a longer duration, but I kept rapidly catching up to the traffic in front of me.\u00a0 I&#8217;ve never had that problem with my IDI before!<\/p>\n<p>The smoke disappears once the turbo spools, but I probably should invest in a puff limiter if I want to keep it where it is.\u00a0 I will likely bump it down another half flat just to make it easier to drive around Los Angeles without attracting the fuzz, and also to prepare for my upcoming high altitude road trip.\u00a0 I&#8217;ll be exceeding 10,000 ft elevation, so having a slightly lower fuel ratio would help make the drive a little easier.<\/p>\n<p>&nbsp;<\/p>\n<p><b>No warranty. You are responsible for your vehicle. For novelty use only. Not responsible for anything or anyone. Not responsible for damage to your vehicle, you, or anyone or anything.<\/b><\/p>\n<p>Copyright 2000-2018\u00a0<a href=\"http:\/\/www.nickpisca.com\/\">Nick Pisca<\/a>\u00a0<a href=\"http:\/\/www.0001design.com\/\">0001D LLC<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Ever since I upgraded to R&amp;D&#8217;s 90cc IP, R&amp;D Injectors, and R&amp;D Stage 1 dual filter setup on the rail,&#8230;  <a class=\"excerpt-read-more\" href=\"https:\/\/www.nickpisca.com\/diesel\/turbo\/wicked-wheel-2-installation-on-a-hypermax-idi-van-turbo-kit-video\/\" title=\"Read Wicked Wheel 2 Installation on a Hypermax IDI Van Turbo Kit [VIDEO]\">Read more &raquo;<\/a><\/p>\n","protected":false},"author":1,"featured_media":722,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[3],"tags":[27,6,142,7,186,4,184],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.nickpisca.com\/diesel\/wp-json\/wp\/v2\/posts\/731"}],"collection":[{"href":"https:\/\/www.nickpisca.com\/diesel\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.nickpisca.com\/diesel\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.nickpisca.com\/diesel\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.nickpisca.com\/diesel\/wp-json\/wp\/v2\/comments?post=731"}],"version-history":[{"count":3,"href":"https:\/\/www.nickpisca.com\/diesel\/wp-json\/wp\/v2\/posts\/731\/revisions"}],"predecessor-version":[{"id":767,"href":"https:\/\/www.nickpisca.com\/diesel\/wp-json\/wp\/v2\/posts\/731\/revisions\/767"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.nickpisca.com\/diesel\/wp-json\/wp\/v2\/media\/722"}],"wp:attachment":[{"href":"https:\/\/www.nickpisca.com\/diesel\/wp-json\/wp\/v2\/media?parent=731"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.nickpisca.com\/diesel\/wp-json\/wp\/v2\/categories?post=731"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.nickpisca.com\/diesel\/wp-json\/wp\/v2\/tags?post=731"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}